Sandra J. Paluzzi
The Bead Peddler

China is THE cloisonne capital of the world.  It has held that distinction since the 15th century AD.  However, cloisonne was not discovered in China.  The earliest known example of cloisonne work has been excavated in Cyprus.  It consisted of 6 gold rings and dates to the 13th century BC.  It is widely believed that cloisonne was developed in several places independently of each other.  Interestingly enough, China is not one of those places.  The cloisonne technique was taught to the Chinese by Central Asian missionaries sometime in the early to mid 14th century.  The Chinese did quickly perfect the process and make it their own.

Ted Henning is an eBay seller who travels to Beijing, China to hand pick the cloisonne beads he sells.  He has visited cloisonne factories and was kind enough to share the cloisonne process with me.  He explained it so well that I have reprinted it here verbatim.  Ted's eBay user id is trhenning.  Please click here to visit Ted's auctions for a large selection of cloisonne beads.  

Cloisonne is a multi step enameling process.  It is one of the famous arts and crafts of Beijing. The making of cloisonné requires rather elaborate and complicated processes: base-hammering, copper-strip inlay, soldering, enamel-filling, enamel-firing, polishing and gilding.

Base-hammering of the body is the first step in the making of cloisonné. The material used for making the body is copper, because copper is easily hammered and stretched. This step requires a sound judgment in the shaping and uniformity of thickness and weight. It is in fact the work of the copper-smith. The only difference is that when an article is shaped, the copper-smith's work is finished, whereas the cloisonné craftsman's work has just begun.

The second step is filigree soldering. This step requires great care and high creativeness. The artisan adheres copper strips onto the body. These strips are of 1/16 inch in diameter and of lengths as the artisan desires. The strips of filigree thus adhered make up a complicated but complete pattern. The artisan has a blueprint in mind and he can make full use of his experience, imagination and aesthetic view in setting the copper strips on the body.

The third step is to apply color which is known as enamel filling. The color or enamel is like the glaze on ceramics. It is called falang. Its basic elements are boric acid, saltpeter and alkaline. Owing to the difference in the minerals added, the color differs accordingly. Usually one with much iron will turn gray, with uranium, yellow, with chromium, green, with zinc, white, with bronze, blue, with gold or iodine, red. The colors are ground into minute powder and applied in the cells separated by filigree.

The fourth step is enamel firing. This is done by putting the article, with its enamel filling, into a kiln. After a short moment, the copper body will turn red. But after firing, the enamel in the little compartments will sink down a bit. That will require a re-filling. This process will go on repeatedly until the little cells are filled.

The fifth step is polishing. The first polish is with emery. Its aim is to make the filigree and the filled compartments even. The whole piece is again put to fire, then polished once more with a whet-stone. Finally, a piece of hard carbon is used to polish again so as to obtain some luster on the surface of the article.

The sixth step is gilding. This is done by placing the article in fluid of gold or silver, changed with electric current. The exposed parts of the filigree and the metal fringes of the article will again undergo another electroplating and a slight polish.

Cloisonne beads are made in a variety of shapes and colors.  The traditional round bead with a  floral pattern is as popular today as it was five centuries ago. 

Traditional cloisonne beads.  In Chinese, Cloisonne is termed "Jing Tai Blue." It was very popular in the "Jing Tai" period of the Ming dynasty.

The wire work in cloisonne beads can be flush with the enamel or it can be raised to create a 3 dimensional look. The wire can also be twisted to add even more interest to the beads.   The beads to the left have raised wire work.

The two pictures of cloisonne beads listed above are from  Ted Henning's auctions.  Each week he lists several pages of cloisonne beads, some of which are figural hearts and elephants.  Please click here to view more of Ted's beads. 

References and Resources:

Web Sites

History and Pictures of Greek Cloisonne
www.panicosm.com/history.html

History of Cloisonne in China
www.crichter.com/orchid/pins/cloisonne_history.htm

********************

Register to win 25.00 Worth of Beads and   Beading Supplies

 Click here to visit The Bead Peddler®

Full line of
   * Bali sterling beads   
   * Indian glass
      beads
   * Czech beads
   * Stringing
      materials
   * Tools   
   * Findings.

Wholesale prices available to the public!

********************